FREE SHIPPING on all orders  |  Made in the USA  |  Most items ship same day
Wiring Guide

9 DVC 8Ω SUBS WIRED IN PARALLEL

Final load: 1.778ΩAmp stable at: 1Ω
SUBWOOFER 1DVC 8ΩSUBWOOFER 2DVC 8ΩSUBWOOFER 3DVC 8ΩSUBWOOFER 4DVC 8ΩSUBWOOFER 5DVC 8ΩSUBWOOFER 6DVC 8ΩSUBWOOFER 7DVC 8ΩSUBWOOFER 8DVC 8ΩSUBWOOFER 9DVC 8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8Ω+8Ω−8ΩWIRING DIAGRAM LEGENDPOSITIVENEGATIVEBRIDGE
Note: Most quality monoblock amps are 1Ω stable. Check your amp's spec sheet.

HOW TO WIRE IT

  1. 01For each sub, connect voice coil 1 negative (−) to voice coil 2 positive (+). The remaining voice coil 1 positive (+) becomes the sub's effective +, and voice coil 2 negative (−) becomes the effective −.
  2. 02Connect every sub's + terminal together (you can use a distribution block, busbar, or twist the wires). Run a single wire from this common + point to the amplifier's + terminal.
  3. 03Connect every sub's − terminal together the same way. Run a single wire from this common − point to the amplifier's − terminal.

OTHER 9-SUB CONFIGS

0.889Ω
9 SVC 8Ω subs (parallel wired)
72Ω
9 SVC 8Ω subs (series wired)
8Ω
9 SVC 8Ω subs (series–parallel wired)
0.444Ω
9 DVC 8Ω subs (coils parallel, parallel wired)

NEED A BOX FOR THIS SETUP?

Ported and sealed enclosures engineered for 9 × 8Ω DVC subwoofers.

Shop enclosures →