FREE SHIPPING on all orders  |  Made in the USA  |  Most items ship same day
Wiring Guide

6 DVC 1Ω SUBS WIRED IN PARALLEL

Final load: 0.083ΩAmp stable at: 0.25Ω
SUBWOOFER 1DVC 1ΩSUBWOOFER 2DVC 1ΩSUBWOOFER 3DVC 1ΩSUBWOOFER 4DVC 1ΩSUBWOOFER 5DVC 1ΩSUBWOOFER 6DVC 1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1ΩWIRING DIAGRAM LEGENDPOSITIVENEGATIVEBRIDGE
Heads up: 0.083Ω is below most amplifier ratings. Verify your amp is rated for this load before wiring.

HOW TO WIRE IT

  1. 01For each sub, connect voice coil 1 positive (+) to voice coil 2 positive (+). Connect voice coil 1 negative (−) to voice coil 2 negative (−). The two bridged terminals become that sub's single effective + and − terminals.
  2. 02Connect every sub's + terminal together (you can use a distribution block, busbar, or twist the wires). Run a single wire from this common + point to the amplifier's + terminal.
  3. 03Connect every sub's − terminal together the same way. Run a single wire from this common − point to the amplifier's − terminal.

OTHER 6-SUB CONFIGS

0.167Ω
6 SVC 1Ω subs (parallel wired)
6Ω
6 SVC 1Ω subs (series wired)
1.5Ω
6 SVC 1Ω subs (series–parallel wired)
3Ω
6 DVC 1Ω subs (coils parallel, series wired)

NEED A BOX FOR THIS SETUP?

Ported and sealed enclosures engineered for 6 × 1Ω DVC subwoofers.

Shop enclosures →