Wiring Guide
5 DVC 2Ω SUBS WIRED IN PARALLEL
Final load: 0.2ΩAmp stable at: 0.25Ω
Heads up: 0.2Ω is below most amplifier ratings. Verify your amp is rated for this load before wiring.
HOW TO WIRE IT
- 01For each sub, connect voice coil 1 positive (+) to voice coil 2 positive (+). Connect voice coil 1 negative (−) to voice coil 2 negative (−). The two bridged terminals become that sub's single effective + and − terminals.
- 02Connect every sub's + terminal together (you can use a distribution block, busbar, or twist the wires). Run a single wire from this common + point to the amplifier's + terminal.
- 03Connect every sub's − terminal together the same way. Run a single wire from this common − point to the amplifier's − terminal.
NEED A BOX FOR THIS SETUP?
Ported and sealed enclosures engineered for 5 × 2Ω DVC subwoofers.
Shop enclosures →