Wiring Guide
4 DVC 0.5Ω SUBS WIRED IN SERIES
Final load: 1ΩAmp stable at: 1Ω
Note: Most quality monoblock amps are 1Ω stable. Check your amp's spec sheet.
HOW TO WIRE IT
- 01For each sub, connect voice coil 1 positive (+) to voice coil 2 positive (+). Connect voice coil 1 negative (−) to voice coil 2 negative (−). The two bridged terminals become that sub's single effective + and − terminals.
- 02Connect the amplifier's + terminal to Sub 1's + terminal.
- 03Connect Sub 1's − terminal to Sub 2's + terminal.
- 04Connect Sub 2's − terminal to Sub 3's + terminal.
- 05Connect Sub 3's − terminal to Sub 4's + terminal.
- 06Connect Sub 4's − terminal back to the amplifier's − terminal.
NEED A BOX FOR THIS SETUP?
Ported and sealed enclosures engineered for 4 × 0.5Ω DVC subwoofers.
Shop enclosures →