FREE SHIPPING on all orders  |  Made in the USA  |  Most items ship same day
Wiring Guide

11 DVC 2Ω SUBS WIRED IN PARALLEL

Final load: 0.364ΩAmp stable at: 0.25Ω
SUBWOOFER 1DVC 2ΩSUBWOOFER 2DVC 2ΩSUBWOOFER 3DVC 2ΩSUBWOOFER 4DVC 2ΩSUBWOOFER 5DVC 2ΩSUBWOOFER 6DVC 2ΩSUBWOOFER 7DVC 2ΩSUBWOOFER 8DVC 2ΩSUBWOOFER 9DVC 2ΩSUBWOOFER 10DVC 2ΩSUBWOOFER 11DVC 2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2Ω+2Ω−2ΩWIRING DIAGRAM LEGENDPOSITIVENEGATIVEBRIDGE
Heads up: 0.364Ω is below most amplifier ratings. Verify your amp is rated for this load before wiring.

HOW TO WIRE IT

  1. 01For each sub, connect voice coil 1 negative (−) to voice coil 2 positive (+). The remaining voice coil 1 positive (+) becomes the sub's effective +, and voice coil 2 negative (−) becomes the effective −.
  2. 02Connect every sub's + terminal together (you can use a distribution block, busbar, or twist the wires). Run a single wire from this common + point to the amplifier's + terminal.
  3. 03Connect every sub's − terminal together the same way. Run a single wire from this common − point to the amplifier's − terminal.

OTHER 11-SUB CONFIGS

0.182Ω
11 SVC 2Ω subs (parallel wired)
22Ω
11 SVC 2Ω subs (series wired)
0.091Ω
11 DVC 2Ω subs (coils parallel, parallel wired)
11Ω
11 DVC 2Ω subs (coils parallel, series wired)

NEED A BOX FOR THIS SETUP?

Ported and sealed enclosures engineered for 11 × 2Ω DVC subwoofers.

Shop enclosures →