FREE SHIPPING on all orders  |  Made in the USA  |  Most items ship same day
Wiring Guide

11 DVC 1Ω SUBS WIRED IN PARALLEL

Final load: 0.182ΩAmp stable at: 0.25Ω
SUBWOOFER 1DVC 1ΩSUBWOOFER 2DVC 1ΩSUBWOOFER 3DVC 1ΩSUBWOOFER 4DVC 1ΩSUBWOOFER 5DVC 1ΩSUBWOOFER 6DVC 1ΩSUBWOOFER 7DVC 1ΩSUBWOOFER 8DVC 1ΩSUBWOOFER 9DVC 1ΩSUBWOOFER 10DVC 1ΩSUBWOOFER 11DVC 1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1Ω+1Ω−1ΩWIRING DIAGRAM LEGENDPOSITIVENEGATIVEBRIDGE
Heads up: 0.182Ω is below most amplifier ratings. Verify your amp is rated for this load before wiring.

HOW TO WIRE IT

  1. 01For each sub, connect voice coil 1 negative (−) to voice coil 2 positive (+). The remaining voice coil 1 positive (+) becomes the sub's effective +, and voice coil 2 negative (−) becomes the effective −.
  2. 02Connect every sub's + terminal together (you can use a distribution block, busbar, or twist the wires). Run a single wire from this common + point to the amplifier's + terminal.
  3. 03Connect every sub's − terminal together the same way. Run a single wire from this common − point to the amplifier's − terminal.

OTHER 11-SUB CONFIGS

0.091Ω
11 SVC 1Ω subs (parallel wired)
11Ω
11 SVC 1Ω subs (series wired)
0.045Ω
11 DVC 1Ω subs (coils parallel, parallel wired)
5.5Ω
11 DVC 1Ω subs (coils parallel, series wired)

NEED A BOX FOR THIS SETUP?

Ported and sealed enclosures engineered for 11 × 1Ω DVC subwoofers.

Shop enclosures →