{"title":"12\" Subwoofer Boxes","description":"\u003cp\u003e12-inch subwoofer enclosures for daily drivers and high-output builds.\u003c\/p\u003e","products":[{"product_id":"basshead-supply-single-12-2-0v2-ported-enclosure","title":"Basshead Supply Single 12\" 2.0V2 Ported Enclosure","description":"Custom built enclosure specifically for the Basshead Supply 2.0V2 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e28.69 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 2.125\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.125\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e24.625\" wide\u003c\/li\u003e\r\n\u003cli\u003e17.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 2.0V2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045669318868,"sku":"BHSP-BHS-2.0V2-S12-RD","price":482.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/a9221ceb-Single-12-Ported-24mm-Baffle-01.png?v=1780517027"},{"product_id":"basshead-supply-dual-12-4-0v2-ported-enclosure","title":"Basshead Supply Dual 12\" 4.0V2 Ported Enclosure","description":"Custom built enclosure specifically for the Basshead Supply 4.0V2 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e11.125\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e23.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Basshead Supply 4.0V2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045669417172,"sku":"BHSP-BHS-4.0V2-D12-RD","price":680.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/2ec02ac3-Dual-12-Ported-24mm-Baffle-01-1.png?v=1780517027"},{"product_id":"jl-audio-single-12-w7-ported-enclosure","title":"JL Audio Single 12\" W7 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the JL Audio W7 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e28.69 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 2.125\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e10.05\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e24.25\" wide\u003c\/li\u003e\r\n\u003cli\u003e17.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045670531284,"sku":"BHSP-JL-W7-S12-RD","price":535.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/5a426b1f-AABE-JL-W7-S12-RD-001-1.png?v=1780517027"},{"product_id":"jl-audio-dual-12-w7-ported-enclosure","title":"JL Audio Dual 12\" W7 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the JL Audio W7 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e57.38 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 4.25\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e10.5\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e34.25\" wide\u003c\/li\u003e\r\n\u003cli\u003e22.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a JL Audio W7 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045670564052,"sku":"BHSP-JL-W7-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/28a390e1-AABE-JL-W7-D12-RD-001-1.png?v=1780517027"},{"product_id":"kicker-single-12-l7x-ported-enclosure","title":"Kicker Single 12\" L7X Ported Enclosure","description":"Custom built enclosure specifically for the Kicker L7X 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.75 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e42.88 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 3.0625\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.0625\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e29.75\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045670858964,"sku":"BHSP-KIC-L7X-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/19ed5969-AABE-KI-L7X-S12-HD-001-1.png?v=1780517031"},{"product_id":"kicker-dual-12-l7x-ported-enclosure","title":"Kicker Dual 12\" L7X Ported Enclosure","description":"Custom built enclosure specifically for the Kicker L7X 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4.95 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e76.0 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.75\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.0625\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e37.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e23.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Kicker L7X 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045670891732,"sku":"BHSP-KIC-L7X-D12-HD","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/a64f2359-AABE-KI-L7X-D12-HD-01.png?v=1780517031"},{"product_id":"american-bass-single-12-xfl-ported-enclosure","title":"American Bass Single 12\" XFL Ported Enclosure","description":"Custom built enclosure specifically for the American Bass XFL 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e28.69 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 2.125\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.4\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e24.25\" wide\u003c\/li\u003e\r\n\u003cli\u003e17.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XFL 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045671055572,"sku":"BHSP-AMB-XFL-S12-RD","price":510.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/6c02d329-BHSBE-AMB-S12-01.png?v=1780517031"},{"product_id":"american-bass-single-12-king-ported-enclosure","title":"American Bass Single 12\" King Ported Enclosure","description":"Custom built enclosure specifically for the American Bass King 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.4 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.6\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.34\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.5\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass King 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045671153876,"sku":"BHSP-AMB-KI-S12-HD","price":633.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/af930702-BHSBE-AMB-S12-01.png?v=1780517031"},{"product_id":"american-bass-single-12-godzilla-ported-enclosure","title":"American Bass Single 12\" Godzilla Ported Enclosure","description":"Custom built enclosure specifically for the American Bass Godzilla 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.4 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.6\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.125\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.625\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass Godzilla 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045671186644,"sku":"BHSP-AMB-GO-S12-HD","price":633.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/46aa3e44-BHSBE-AMB-S12-01.png?v=1780517031"},{"product_id":"american-bass-single-12-xmaxxx-monster-ported-enclosure","title":"American Bass Single 12\" XMAXXX Monster Ported Enclosure","description":"Custom built enclosure specifically for the American Bass XMAXXX Monster 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.4 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.6\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.125\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.625\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XMAXXX Monster 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045671252180,"sku":"BHSP-AMB-XM-S12-HD","price":633.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/381a9b61-BHSBE-AMB-S12-01.png?v=1780517031"},{"product_id":"sundown-audio-single-12-zv7-ported-enclosure","title":"Sundown Audio Single 12\" ZV7 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV7 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.857679\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV7 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045671809236,"sku":"BHSP-SUN-ZV7-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/5489e561-AABE-SA-SAv2-S10-RD-01.png?v=1780517035"},{"product_id":"sundown-audio-single-12-zv6-ported-enclosure","title":"Sundown Audio Single 12\" ZV6 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV6 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV6 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045671940308,"sku":"BHSP-SUN-ZV6-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/55d49f6f-AABE-SA-SAv2-S10-RD-01.png?v=1780517035"},{"product_id":"sundown-audio-single-12-zv5-ported-enclosure","title":"Sundown Audio Single 12\" ZV5 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV5 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV5 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672005844,"sku":"BHSP-SUN-ZV5-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/fd75eca9-AABE-SA-SAv2-S10-RD-01.png?v=1780517040"},{"product_id":"sundown-audio-single-12-zv3-ported-enclosure","title":"Sundown Audio Single 12\" ZV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.09\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672038612,"sku":"BHSP-SUN-ZV3-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/e82a8fa3-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-zv2-ported-enclosure","title":"Sundown Audio Single 12\" ZV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.09\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045671973076,"sku":"BHSP-SUN-ZV2-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/49d6a843-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-zv4-ported-enclosure","title":"Sundown Audio Single 12\" ZV4 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV4 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV4 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672071380,"sku":"BHSP-SUN-ZV4-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/401805af-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-xv4-ported-enclosure","title":"Sundown Audio Single 12\" XV4 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio XV4 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV4 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672104148,"sku":"BHSP-SUN-XV4-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/350e4323-AABE-SA-SAv2-S10-RD-01.png?v=1780517040"},{"product_id":"sundown-audio-single-12-xv3-ported-enclosure","title":"Sundown Audio Single 12\" XV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio XV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672136916,"sku":"BHSP-SUN-XV3-S12-HD","price":665.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/83c548f3-AABE-SA-SAv2-S10-RD-01.png?v=1780517040"},{"product_id":"sundown-audio-single-12-nsv6-ported-enclosure","title":"Sundown Audio Single 12\" NSV6 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV6 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV6 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672235220,"sku":"BHSP-SUN-NSV6-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/f4352ee0-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-nsv4-ported-enclosure","title":"Sundown Audio Single 12\" NSV4 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV4 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV4 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672202452,"sku":"BHSP-SUN-NSV4-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/0614b6d3-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-xv2-ported-enclosure","title":"Sundown Audio Single 12\" XV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio XV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672267988,"sku":"BHSP-SUN-XV2-S12-HD","price":665.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/22620b1b-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-nsv3-ported-enclosure","title":"Sundown Audio Single 12\" NSV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672169684,"sku":"BHSP-SUN-NSV3-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/84a630ab-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-nsv5-ported-enclosure","title":"Sundown Audio Single 12\" NSV5 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV5 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV5 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672366292,"sku":"BHSP-SUN-NSV5-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/76ebc1c7-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-nsv2-ported-enclosure","title":"Sundown Audio Single 12\" NSV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.09\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672300756,"sku":"BHSP-SUN-NSV2-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/3b1f4280-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-single-12-m-series-ported-enclosure","title":"Sundown Audio Single 12\" M Series Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio M Series 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e36.68 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.62\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e26.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio M Series 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045672333524,"sku":"BHSP-SUN-M-S12-HD","price":665.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/6a7f26d5-AABE-SA-SAv2-S10-RD-01.png?v=1780517039"},{"product_id":"sundown-audio-dual-12-m-series-ported-enclosure","title":"Sundown Audio Dual 12\" M Series Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio M Series 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio M Series 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045673578708,"sku":"BHSP-SUN-M-D12-HD","price":944.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/0a2744b7-AABE-SA-SAv2-D10-RD-01.png?v=1780517047"},{"product_id":"sundown-audio-dual-12-nsv2-ported-enclosure","title":"Sundown Audio Dual 12\" NSV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.09\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045673677012,"sku":"BHSP-SUN-NSV2-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/8feba845-AABE-SA-SAv2-D10-RD-01.png?v=1780517046"},{"product_id":"sundown-audio-dual-12-nsv3-ported-enclosure","title":"Sundown Audio Dual 12\" NSV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045673709780,"sku":"BHSP-SUN-NSV3-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/ce17d91d-AABE-SA-SAv2-D10-RD-01.png?v=1780517047"},{"product_id":"sundown-audio-dual-12-nsv4-ported-enclosure","title":"Sundown Audio Dual 12\" NSV4 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV4 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV4 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045673840852,"sku":"BHSP-SUN-NSV4-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/73dc33c6-AABE-SA-SAv2-D10-RD-01.png?v=1780517047"},{"product_id":"sundown-audio-dual-12-nsv5-ported-enclosure","title":"Sundown Audio Dual 12\" NSV5 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV5 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV5 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045673873620,"sku":"BHSP-SUN-NSV5-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/edeb2aca-AABE-SA-SAv2-D10-RD-01.png?v=1780517051"},{"product_id":"sundown-audio-dual-12-nsv6-ported-enclosure","title":"Sundown Audio Dual 12\" NSV6 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio NSV6 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio NSV6 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674037460,"sku":"BHSP-SUN-NSV6-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/c053b606-AABE-SA-SAv2-D10-RD-01.png?v=1780517051"},{"product_id":"sundown-audio-dual-12-uv1-ported-enclosure","title":"Sundown Audio Dual 12\" UV1 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio UV1 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e58.05 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 4.3\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.01\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e35.125\" wide\u003c\/li\u003e\r\n\u003cli\u003e22.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio UV1 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674135764,"sku":"BHSP-SUN-UV1-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/974b9d69-AABE-SA-SAv2-D10-RD-01.png?v=1780517050"},{"product_id":"sundown-audio-dual-12-xv2-ported-enclosure","title":"Sundown Audio Dual 12\" XV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio XV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674201300,"sku":"BHSP-SUN-XV2-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/7950e869-AABE-SA-SAv2-D10-RD-01.png?v=1780517051"},{"product_id":"sundown-audio-dual-12-xv3-ported-enclosure","title":"Sundown Audio Dual 12\" XV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio XV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674266836,"sku":"BHSP-SUN-XV3-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/7e370891-AABE-SA-SAv2-D10-RD-01.png?v=1780517051"},{"product_id":"sundown-audio-dual-12-xv4-ported-enclosure","title":"Sundown Audio Dual 12\" XV4 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio XV4 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio XV4 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674463444,"sku":"BHSP-SUN-XV4-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/4bdd36f8-AABE-SA-SAv2-D10-RD-01.png?v=1780517051"},{"product_id":"sundown-audio-dual-12-zv2-ported-enclosure","title":"Sundown Audio Dual 12\" ZV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.09\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674496212,"sku":"BHSP-SUN-ZV2-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/e6558605-AABE-SA-SAv2-D10-RD-01.png?v=1780517055"},{"product_id":"sundown-audio-dual-12-zv3-ported-enclosure","title":"Sundown Audio Dual 12\" ZV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.09\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674528980,"sku":"BHSP-SUN-ZV3-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/3240ec60-AABE-SA-SAv2-D10-RD-01.png?v=1780517054"},{"product_id":"sundown-audio-dual-12-zv4-ported-enclosure","title":"Sundown Audio Dual 12\" ZV4 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV4 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV4 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674823892,"sku":"BHSP-SUN-ZV4-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/d0f92b14-AABE-SA-SAv2-D10-RD-01.png?v=1780517055"},{"product_id":"sundown-audio-dual-12-zv5-ported-enclosure","title":"Sundown Audio Dual 12\" ZV5 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV5 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV5 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674791124,"sku":"BHSP-SUN-ZV5-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/17514c53-AABE-SA-SAv2-D10-RD-01.png?v=1780517054"},{"product_id":"sundown-audio-dual-12-zv6-ported-enclosure","title":"Sundown Audio Dual 12\" ZV6 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV6 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV6 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674922196,"sku":"BHSP-SUN-ZV6-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/8a8b32c6-AABE-SA-SAv2-D10-RD-01.png?v=1780517055"},{"product_id":"sundown-audio-dual-12-zv7-ported-enclosure","title":"Sundown Audio Dual 12\" ZV7 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio ZV7 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e31.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.8 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.55\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.19\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e39.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio ZV7 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045674954964,"sku":"BHSP-SUN-ZV7-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/2a4fbdc9-AABE-SA-SAv2-D10-RD-01.png?v=1780517054"},{"product_id":"sundown-audio-single-12-sav3-ported-enclosure","title":"Sundown Audio Single 12\" SAV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio SAV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1.75 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e25.31 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 1.875\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.2\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e21.75\" wide\u003c\/li\u003e\r\n\u003cli\u003e17.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675086036,"sku":"BHSP-SUN-SAV3-S12-RD","price":504.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/9c96a1f7-AABE-SA-SAv2-S10-RD-01.png?v=1780517058"},{"product_id":"sundown-audio-single-12-sav2-ported-enclosure","title":"Sundown Audio Single 12\" SAV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio SAV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1.75 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e25.31 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 1.875\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.01\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e21.75\" wide\u003c\/li\u003e\r\n\u003cli\u003e17.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675282644,"sku":"BHSP-SUN-SAV2-S12-RD","price":504.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/0a867333-AABE-SA-SAv2-S10-RD-01.png?v=1780517058"},{"product_id":"sundown-audio-dual-12-sav3-ported-enclosure","title":"Sundown Audio Dual 12\" SAV3 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio SAV3 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e50.62 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 3.75\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.2\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e33.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e20.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV3 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675348180,"sku":"BHSP-SUN-SAV3-D12-RD","price":724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/8ec89cfe-AABE-SA-SAv2-D10-RD-01.png?v=1780517059"},{"product_id":"sundown-audio-dual-12-sav2-ported-enclosure","title":"Sundown Audio Dual 12\" SAV2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Sundown Audio SAV2 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e50.62 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 3.75\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.01\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e33.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e20.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a Sundown Audio SAV2 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675512020,"sku":"BHSP-SUN-SAV2-D12-RD","price":724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/8622342b-AABE-SA-SAv2-D10-RD-01.png?v=1780517059"},{"product_id":"american-bass-dual-12-godzilla-ported-enclosure","title":"American Bass Dual 12\" Godzilla Ported Enclosure","description":"Custom built enclosure specifically for the American Bass Godzilla 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.0 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.5\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.125\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e38.625\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass Godzilla 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675479252,"sku":"BHSP-AMB-GO-D12-HD","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/cdd6d797-BHSBE-AMB-D12-01-1.png?v=1780517059"},{"product_id":"american-bass-dual-12-king-ported-enclosure","title":"American Bass Dual 12\" King Ported Enclosure","description":"Custom built enclosure specifically for the American Bass King 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.0 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.5\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.34\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e38.625\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass King 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675675860,"sku":"BHSP-AMB-KI-D12-HD","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/53e1b62e-BHSBE-AMB-D12-01-1.png?v=1780517058"},{"product_id":"american-bass-dual-12-xfl-ported-enclosure","title":"American Bass Dual 12\" XFL Ported Enclosure","description":"Custom built enclosure specifically for the American Bass XFL 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e33.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e57.38 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e13.5\" x 4.25\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.4\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e34.375\" wide\u003c\/li\u003e\r\n\u003cli\u003e22.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XFL 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675708628,"sku":"BHSP-AMB-XFL-D12-RD","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/c59dcbcc-BHSBE-AMB-D12-01-1.png?v=1780517063"},{"product_id":"american-bass-dual-12-xmaxxx-monster-ported-enclosure","title":"American Bass Dual 12\" XMAXXX Monster Ported Enclosure","description":"Custom built enclosure specifically for the American Bass XMAXXX Monster 12\" subwoofer.\r\n\r\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e5.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e72.0 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e16.0\" x 4.5\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.125\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e18.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e38.625\" wide\u003c\/li\u003e\r\n\u003cli\u003e21.875\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a American Bass XMAXXX Monster 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675774164,"sku":"BHSP-AMB-XM-D12-HD","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/e29b5634-BHSBE-AMB-D12-01-1.png?v=1780517063"},{"product_id":"dc-audio-single-12-level-5-ported-enclosure","title":"DC Audio Single 12\" Level 5 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the DC Audio Level 5 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.0 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e28.88 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.0625\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.15\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e21.875\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nLead time is 2-3 weeks, no refunds once enclosures have been cut out! This is a custom made box specifically for a DC Audio Level 5 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":48045675970772,"sku":"BHSP-DC-LVL5-S12-HD","price":595.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/8841\/5700\/files\/0fa86de1-BHSBE-DC-S12-HD-01-8.png?v=1780517063"}],"url":"https:\/\/bassheadsupply.com\/collections\/12-subwoofer-boxes.oembed","provider":"Basshead Supply","version":"1.0","type":"link"}